Alexandria Dental Journal

Keywords = CAD/CAM

POTENTIAL ANTIFUNGAL EFFECT OF ACACIA ARABICA EXTRACT VERSUS STERILE WATER REGARDING SURFACE TOPOGRAPHY OF DENTURE BASE MATERIALS: AN IN-VITRO STUDY

Volume 50, Issue 2, August 2025, Pages 116-122

Mai Salah El-Din; Michael G Shehat; Sara M Kamal

Cumulative effect of microwave disinfection on flexural strength and dimensional stability of CAD/CAM milled versus 3D-printed denture resins (INVITRO STUDY)

Volume 50, Issue 2, August 2025, Pages 123-128

Ezzeldin M. Ezzeldin; Mohamed S. EL-Attar; Eman M. Elrafah; Mona H. Mohy ElDin

FIT ACCURACY OF OPEN VERSUS CLOSED CAD/CAM SYSTEMS USING A SECTIONAL METHOD

Volume 49, Issue 3, December 2024, Pages 100-105

Mohamed Badr Marey; Sanaa Hussein; Moustafa Nabil Aboushelib

SPECTROPHOTOMETRIC ANALYSIS OF CAD-CAM PRE-CRYSTALLIZED LITHIUM DISILICATE CERAMIC AFTER DIFFERENT SINTERING CYCLES (IN-VITRO STUDY)

Volume 49, Issue 3, December 2024, Pages 150-154

Abdurrahman Essam Elsheikh; Yousria Attia Shalaby; Fatma Mohamed El-Sharkawy; Rewaa Gaber AboElhassan

MARGINAL FIT ASSESSMENT OF CAD/CAM ZIRCONIA CROWNS FABRICATED BY DIGITAL SCANNING OF DIES AND SILICONE IMPRESSION (IN VITRO STUDY)

Volume 49, Issue 3, December 2024, Pages 106-112

Ahmed Mohamed Ramadan; Yousria Attia Shalaby; Naguib Ahmad El fawal

INFLUENCE OF FABRICATION TECHNIQUE ON THE FRACTURE RESISTANCE OF 3-UNIT INTERIM FIXED DENTAL PROSTHESIS: AN IN VITRO STUDY.

Volume 49, Issue 2, August 2024, Pages 143-148

Mostafa Esmat Elashkar; Yehia Aboushady; Mohamed Halawani

Restoration of an Endodontically Treated First Permanent Molar in a Nine-Year Old Child using Digital Workflow: A case report

Volume 48, Issue 3, December 2023, Pages 195-199

Nahla A. Aly; Mahmoud Eltaweel

EFFECT OF ELECTRONIC CIGARETTES SMOKING ON COLOR STABILITY OF CAD/CAM ACRYLIC RESIN: IN VITRO STUDY

Volume 48, Issue 3, December 2023, Pages 160-165

Ahmed Zakaria Mahmoud; Mohamed Sherine EL-Attar; Mohamed Abd AL Raheem Abu Saied; Ingy Said Hassan

BIOCOMPATIBILITY OF 3D PRINTED PHOTOINITIATED PROSTHODONTIC RESINS (In vitro Study)

Volume 48, Issue 2, August 2023, Pages 132-138

Maisa Mohamed Farid; Faten Salah Eldin Abbas; Radwa Ali Mehanna; Mervat E Abd-ELLAH

EFFECT OF TWO DIFFERENT IMPRESSION TECHNIQUES ON FIT ACCURACY OF CAD/CAM POST AND CORE RESTORATIONS (IN VITRO STUDY)

Volume 48, Issue 2, August 2023, Pages 151-157

Radwa Shaker Abdelmonem; Mohammed Wahid El Din Elkateb; Amir Azer

EVALUATION OF THE RETENTION OF CONVENTIONAL VERSUS CAD/CAM FABRICATED EXTRA CORONAL ATTACHMENTS FOR REMOVABLE PARTIAL DENTURE (IN-VITRO STUDY)

Volume 48, Issue 2, August 2023, Pages 173-178

Hala Selim; Ahmed Adel Abdel Hakim; Lucette Segaan

EFFECTIVENESS OF CAD/CAM PEEK FABRICATED SPACE MAINTAINER IN CHILDREN: A RANDOMIZED CONTROLLED CLINICAL TRIAL

Volume 48, Issue 2, July 2023, Pages 203-210

Nancy Samir AboulAzm; Aly A. Sharaf; Karin ML. Dowidar; Ahmed A. AbdelHakim

Accuracy of Conventional Versus Digital Impression Techniques in Construction of Digitally Printed Surgical Guide "In Vitro Study"

Volume 47, Issue 3, December 2022, Pages 100-105

Dina Ebid; Nermeen Abdelsalam Rady; Ahmed Adel AbdelHakim

FRACTURE RESISTANCE OF DIFFERENT CAD/CAM CERAMIC INLAYS (IN VITRO STUDY).

Volume 47, Issue 1, April 2022, Pages 122-126

Maram Hassan Saad; EL Sayed Mostafa Mahmoud; Rania Reda Afifi

EVALUATION OF THE ACCURACY OF DIGITAL MODELS OBTAINED FROM INTRAORAL SCANNERS WITH DIFFERENT CAD/CAM SCANNING TECHNOLOGIES- AN IN VITRO STUDY

Volume 46, Issue 1, April 2021, Pages 111-114

Passent Aly; Cherif Mohsen

EFFECT OF CAD/CAM NASOALVEOLAR MOLDING APPLIANCE ON CORRECTION OF THE NASAL DEFORMITY IN COMPLETE BILATERAL CLEFT LIP AND PALATE

Volume 45, Issue 3, December 2020, Pages 49-54

Kenda I. Hanno; Ahmed M. Al Shimy; Ahmed M.A. Habib; Ibrahim El-Fahham; Mona S. Saad

EVALUATION OF THE ACCURACY OF DIGITAL MODELS OBTAINED FROM INTRAORAL SCANNERS WITH DIFFERENT CAD/CAM SCANNING TECHNOLOGIES- AN IN VITRO STUDY

Volume 45, Issue 3, December 2020, Pages 94-98

Passent S. Aly; Cherif A. Mohsen

A COMPARATIVE STUDY TO EVALUATE THE RETENTION OF CONVENTIONAL AND CAD/CAM FABRICATED BAR ATTACHMENT IMPLANT SUPPORTED ASSEMBLY (IN VITRO STUDY)

Volume 45, Issue 1, April 2020, Pages 75-79

Aly Abdelrehim; Ahmed A. Abdelhakim; Sherif M. ElDakkak; Mohamed A. Gepreel

EVALUATION OF STRAIN DEVELOPED AROUND SHORT DENTAL IMPLANTS USING TWO DIFFERENT RESTORATIVE MATERIALS (IN VITROSTUDY)

Volume 45, Issue 1, April 2020, Pages 80-87

Eman A. Ibrahim; Ahlam Elsharkawy; Mohamed S Nassif; Nermeen A Rady

ACCURACY OF IMPLANT PLACEMENT USING TWO DIFFERENT TYPES OF CAD/CAM SURGICAL GUIDES (AN INVITRO STUDY)

Volume 44, Issue 3, December 2019, Pages 28-33

Moustafa F. Ahmed; Ahmed M. AbdelHamid; Fayza H. AlAbbasy

CLINICAL EVALUATION OF REMOVABLE PARTIAL DENTURE CONSTRUCTED FROM 3D PRINTED RESIN PATTERN DESIGNED USING CAD CAM TECHNOLOGY

Volume 44, Issue 2, August 2019, Pages 15-21

Ahmed S. Saad; Faten S. Abbas; Safyah H. Elgharabawy

LABORATORY EVALUATION OF PRE-POLYMERIZED DENTURE BASE MATERIAL USED FOR CAD/CAM COMPLETE DENTURE MANUFACTURING

Volume 43, Issue 3, December 2018, Pages 94-101

Yusra M. Saad; Ahmed M. Abdelhamid; Sonia M. ElShabrawy

THE EFFECT OF TOOTH PREPARATION TAPER ON THE MARGINAL FIT AND FRACTURE RESISTANCE OF CAD/CAM ZIRCONIA COPINGS

Volume 40, Issue 2, December 2015, Pages 214-220

E.M Emtair; S Bakry; A.S Azer

WEAR BEHAVIOUR AND SURFACE ROUGHNESS OF POLYMER INFILTRATED CERAMIC MATERIAL COMPARED TO PRESSABLE GLASS CERAMIC

Volume 40, Issue 1, July 2015, Pages 65-70

E Elhomiamy; Y Aboushady; B El Malakh

Journal Archive

Volume 50 (2025)

Volume 49 (2024)

Volume 48 (2023)

Volume 47 (2022)

Volume 46 (2021)

Volume 45 (2020)

Volume 44 (2019)

Volume 43 (2018)

Volume 42 (2017)

Volume 41 (2016)

Volume 40 (2015)